Gravel Calculator

Gravel Calculator

BuildXL – Gravel Calculator | Cubic Yards & Tons for Driveways, Pathways & Base Material

Gravel Calculator

Estimate cubic yards, tons, and bags for driveways, pathways & base material

๐Ÿ“ Area Shape
๐Ÿ“ Depth
๐Ÿชจ Gravel Type
๐Ÿ“Š Gravel Estimate
โ€”
โš ๏ธ Disclaimer: Always consult a structural engineer for load-bearing elements. This tool provides estimates only. Gravel weights vary by moisture and composition โ€” confirm with your supplier.

๐Ÿ“– How to Use This Gravel Calculator (Step-by-Step)

Follow these steps to get an accurate gravel estimate for your project:

  1. Select area shape โ€” Rectangle, Circle, or Irregular area.
  2. Enter dimensions โ€” Length and width for rectangles, diameter for circles, or total square feet for irregular shapes.
  3. Enter desired depth โ€” 2-4 inches for pathways, 4-6 inches for driveways, 6-12 inches for base material.
  4. Select gravel type โ€” Different gravels have different weights per cubic yard.
  5. Toggle compaction factor โ€” Add 15% for base material that will be compacted.
  6. Click calculate โ€” Get cubic yards, tons, and bag estimates.

Pro tip: Always order 10-15% extra for irregular areas, spillage, and future top-ups. Gravel settles and compacts over time.

๐Ÿชจ Gravel Type Reference

Gravel TypeWeight (lbs/cu yd)Tons per cu ydBest Used For
Pea Gravel1,4000.7 tonsPathways, drainage, playgrounds, decorative
Crushed Stone / Base2,7001.35 tonsDriveways, base material, foundations
River Rock2,8001.4 tonsLandscaping, drainage, decorative
Decomposed Granite2,6001.3 tonsPaths, patios, compacted surfaces

Note: A standard pickup truck holds approximately 2-3 cubic yards. A dump truck holds 10-15 cubic yards.

๐Ÿ—๏ธ Real-World Gravel Examples

Example 1: Driveway (40′ x 20′, 4 inches deep) – Crushed Stone
Area: 800 sq ft | Volume: 800 ร— (4รท12) = 267 cu ft รท 27 = 9.9 cu yd
With compaction (15%): 11.4 cu yd | Tons: 11.4 ร— 1.35 = 15.4 tons
Example 2: Circular Patio (15′ diameter, 2 inches deep) – Pea Gravel
Area: ฯ€ ร— (7.5)ยฒ = 177 sq ft | Volume: 177 ร— (2รท12) = 29.5 cu ft รท 27 = 1.09 cu yd
Bags needed (0.5 cu ft bag): 59 bags
Example 3: Pathway (100′ x 3′, 3 inches deep) – Decomposed Granite
Area: 300 sq ft | Volume: 300 ร— (3รท12) = 75 cu ft รท 27 = 2.78 cu yd
With compaction: 3.2 cu yd | Tons: 3.2 ร— 1.3 = 4.2 tons
Example 4: French Drain Trench (50′ x 1.5′, 12 inches deep) – Pea Gravel
Area: 75 sq ft | Volume: 75 ร— (12รท12) = 75 cu ft รท 27 = 2.78 cu yd
Tons: 2.78 ร— 0.7 = 1.9 tons

โ“ Frequently Asked Questions

How much gravel do I need for a driveway?
For a standard 2-car driveway (20′ x 40′) at 4 inches deep: 800 sq ft ร— 0.333 ft = 266 cu ft รท 27 = 9.9 cubic yards. Add 15% for compaction = 11.4 cubic yards (about 15.4 tons of crushed stone).
How many square feet does a ton of gravel cover?
One ton of gravel covers approximately 100 sq ft at 2 inches deep, 70 sq ft at 3 inches deep, or 50 sq ft at 4 inches deep. Coverage varies by gravel type and density.
How much does a cubic yard of gravel weigh?
Pea gravel: ~1,400 lbs (0.7 tons). Crushed stone: ~2,700 lbs (1.35 tons). River rock: ~2,800 lbs (1.4 tons). Decomposed granite: ~2,600 lbs (1.3 tons).
How much gravel can a pickup truck hold?
A standard 1/2 ton pickup can safely hold 2-3 cubic yards (about 3-4 tons) of gravel. Full-size 3/4 ton trucks can hold 3-4 cubic yards. Always check your truck’s payload capacity.
Do I need a base layer under gravel?
For driveways and high-traffic areas: yes. Use 4-6 inches of crushed stone base, then 2-3 inches of decorative gravel on top. For pathways, 2-3 inches of gravel alone is usually sufficient.
How much does gravel delivery cost?
$50-150 per load for delivery, depending on distance and quantity. Some suppliers offer free delivery for 10+ cubic yards. Short loads under 5 yards may have additional fees.

Leave a Reply

Your email address will not be published. Required fields are marked *